Download SIGNALLING SYSTEMS
Transcript
104 RATO 6 / 05-2012 length of track in rear of the main signal, which is prior to the distant signal (Figure 6.4:32). ≥ 500m Figure 6.4:32 The main signal distance from the separate distant signal in advance of the main signal. 6.4.4.5 Main signal connected to shunting signals. Constructing a new main signal connected to shunting signals is not allowed. An existing main signal connected to shunting signals may be modified, if the maximum speed limit of the track is a maximum of 35kph on the tracks associated with the shunting signals in question. The main signal connected to the shunting signals to be modified must fulfil the requirements stated here and in Chapter 6.3.5.5. The main signal connected to shunting signals must be positioned in advance of points that are protected by shunting signals according to the requirements for positioning a track-related main signal. An effort should be made to position the main signal connected to shunting signals at least 300m distance from the shunting signal closest to the main signal. The numerical part of the code for the main signal connected to shunting signals must be the number of the track in rear of the main signal, if there is no point on the track section in rear of the main signal. The numerical part of the code for the main signal connected to shunting signals must be a number according to the numbering of tracks in question, if there is a point on the track section in rear of the main signal. 6.4.4.6 Effect of a line point on main signal positioning The main signal distance from the nearest point of the line point must be at least 350m, if the main signal is protecting the line point (Figure 6.4:33). ≥ 350m ≥ 350m Figure 6.4:33 Positioning a line point protecting main signal in respect to the line point. The main and block signals of different directions on the line must be positioned on the line, determined in the engineering configuration requirements, at least 350m from each