Download VeriCall Edge Function Reference Manual

Transcript
Trinity Convergence
VeriCall Edge Function Reference Manual
The enumeration elements of t_ve_video_control_mirror_e are as follows:
Element
Definition
VE_VIDEO_CONTROL_IMAGE_MIRROR_DISABLE
The image is not mirrored.
VE_VIDEO_CONTROL_IMAGE_MIRROR_ENABLE_H_PLANE
The image is mirrored on the
horizontal plane only.
VE_VIDEO_CONTROL_IMAGE_MIRROR_ENABLE_V_PLANE
The image is mirrored on the
vertical plane only.
VE_VIDEO_CONTROL_IMAGE_MIRROR_ENABLE_H_AND_V_PLANES
The image is mirrored on the
horizontal and vertical plane.
B.154
t_ve_video_control_mute_mode_e
The
t_ve_video_control_mute_mode_e
enumeration
is
used
by
the
t_ve_video_control_mute_s structure as defined in Appendix B.32.2 on Page 349. The
t_ve_video_control_mute_mode_e enumeration determines the mute mode of operation to
be performed on the video stream. The enumeration is defined in ve_control_video.h and is
described below:
typedef enum{
VE_VIDEO_CONTROL_MUTE_FILE_IMAGE = 0,
VE_VIDEO_CONTROL_MUTE_LAST_FRAME,
VE_VIDEO_CONTROL_MUTE_OFF
}t_ve_video_control_mute_mode_e;
The enumeration elements are as follows:
Element
Definition
VE_VIDEO_CONTROL_MUTE_FILE_IMAGE
Mute the video stream and send a file image to the stream.
VE_VIDEO_CONTROL_MUTE_LAST_FRAME
Mute the video stream and transmit the last video frame.
VE_VIDEO_CONTROL_MUTE_OFF
Disable a previously set mute mode.
To
change
any
of
the
mute
states,
VE_VIDEO_CONTROL_MUTE_OFF must be called
first.
For
example,
to
change
from
VE_VIDEO_CONTROL_MUTE_FILE_IMAGE
to
VE_VIDEO_CONTROL_MUTE_LAST_FRAME
requires a VE_VIDEO_CONTROL_MUTE_OFF call
first.
578
Appendix B: Structures and Enumerations
Trinity Convergence Confidential