Download 2LAYINV

Transcript
Introduction
The 2LAYINV program is used to interpret geophysical, electromagnetic VLF-R data (apparent
resistivity and phase) measured along a single profile at a single frequency. The inversion is made
separately for each data point using a one-dimensional two-layer earth model. As such the program
suits well the interpretation of the thickness and resistivity of relatively thin resistive (soil and till)
layers and the resistivity variations of the basement rocks. Note that the inversion model is still
only one-dimensional and that the interpretation results actually yield a pseudosection of the 2-D
resistivity distribution.
Starting from an initial model linearized inversion with adaptive damping is used to optimize the
thickness and the resistivity of the overburden layer and the resistivity of the basement so that the
model minimizes the error between the measured and the computed VLF-R data. Laterally
constrained inversion is obtained by minimizing the roughness of the model that is the variation of
the model parameters between neighboring points, together with the data error. As a result a
smoothly varying (Occam inversion) model is obtained. The roughness and/or the fix/free status the
parameters can be set manually to allow discontinuities and to incorporate a priori data in the
model.
The 2LAYINV program requires a PC with 32-bit Windows 9x/NT4/2000/XP operating system
and a graphics display of at least 1024×800 resolution. Memory requirements and processor speed
and are not critical, since the program uses dynamic memory allocation and the inverse
computation is fast to perform even on slow computers. The 2LAYINV program includes simple
graphical user interface (GUI) that allows changing some inversion parameters, handling file input
and output, and visualization of the VLF-R data and the two-layer model section. The user interface
and the data visualization are based on the DISLIN graphics library.
Setting up
The distribution file (2LAYINV.ZIP) can be downloaded free of charge from author's web-site at
the University of Oulu, Finland (http://www.gf.oulu.fi/~mpi).
The program requires two files:
2LAYINV.EXE
DISDLL.DLL
the executable file
dynamic link library for the DISLIN graphics
The distribution file contains also a description file (_README.TXT), this user's manual
(2LAYINV_MANU.PDF), and an example data file (EXAMPLE.DAT).
To install the program, unzip (Pkzip/Winzip) the distribution file into a new folder. To be able to
start the program from a shortcut that locates in a different directory, move or copy the
DISDLL.DLL file into the WINDOWS\SYSTEM folder or define the system path (control
panel/system/environment).
2