Download Application Operation - Electro

Transcript
7.2 Displaying method of screen
1
Procedure
Selecting a Display Waveform
1. Press the Module Select soft key to display the Module Select for Graph screen.
2
3
4
5
2. Use the arrow keys to move the cursor to a module whose waveform you want to
display, and press the Set W1, Set W2, or Set W3 soft key. A mark will appear in
one of the boxes to the left of the selected sensor module.
For the AQ2200-221, the left box is device 1
and the right box is device 2. You cannot set
the same color twice for the same module.
6
7
Displaying the Graph of the Measurement Result
8
9
Note
• When the AQ2200-221 is installed in the frame controller, you can choose whether or not to
display the waveforms of each of its devices.
• The box color indications are as follows:
Set W1: Red
Set W2: Green
Set W3: Blue
App1
App2
App3
App4
Index
IM 735101-04EN
7-7