Download SPAN-SE User Manual - Borealis Precision

Transcript
Chapter 3
48
3SPAN-SE Operation
4.
Use the
button at the top of the configurations selection box to add a new configuration. To
delete a configuration, select it from the list and click on the
button. To duplicate an existing
configuration, click on the
button. You can select any name in the list and edit it to change it.
5.
Select Serial, or Network, from the Type list and select the PC/laptop port, that the receiver is
connected to, from the Port list. If selecting a network connection, you should have configured an
IP address into the receiver prior to connecting, see SPAN-SE Ethernet Connection on page 78.
SPAN-SE User Manual Rev 7