Download Untitled
Transcript
Lab Procedures Attendance Attendance is mandatory. Each student must complete all labs in order to receive a passing grade. If you miss a lab without prior notification of the instructor, you will be required to make up the lab subject to a 50% penalty in grade. No penalty will be imposed if an arrangement is made with the instructor prior to the lab. Lab Preparation Most labs require the preparation of a prelab which may involve a significant amount of work. The prelab must be completed prior to arrival at the lab. The prelab work will be graded as you enter the lab and is part of your lab grade. Reports Lab reports are due at the end of each lab. Each report must be written neatly and must be organized in a way that is easy to read. Each report must include the following information: Lab # Lab Title and Objective Each procedure completely written out Circuit diagrams Truth table for combinational logic Timing diagrams (if applicable) Circuit diagrams must include IC# and gate# as shown in the diagram below. All pins must be labeled. Power and ground connections must be drawn. A legend listing all ICs (v.g., U1 7400 Quad NAND) must be a part of each circuit diagram. +5 V +5V Gnd X Switch 1 +5V Gnd Y Switch 2 +5V Gnd Z Switch 3 U3-A 1 14 7 2 +5 V 14 1 2 U1-A 4 5 U1-B +5 V 3 1 2 6 W 14 U2-A 7 1 3 LED - A 7 Legend: U1: 7408 Quad AND U2: 7432 Quad OR U3: 7404 Hex NOT