Download File

Transcript
F.R.I.A.R. Cycle 2 Design Report i
Executive Summary
This design report describes the design tradeoffs in our attempt to design an extension
to the commercially available AR Drone 2.0. This extension, along with the commercial
drone, together are described as the flying, room-identifying, autonomous robot (F.R.I.A.R.).
The goals for the F.R.I.A.R. project are:
1. establish a two way wireless connection between a ground control station (laptop)
and our robot to transmit commands
2. autonomously navigate down a straight hallway maintaining a perpendicular distance
to the wall
3. detect obstacles of the robot, and avoid them if necessary
4. use AR Drone 2.0’s built in camera to read room numbers from the number plaques
of the Shelby Center at Auburn University.
Unfortunately, we ran into many problems in our attempt to accomplish these goals.
Our prototype is wirelessly controlled manually from a laptop. It can detect obstacles
but cannot navigate autonomously and does not have any on board image processing.
We also developed software to enhance the video steam from the commercial AR drone
by removing the barrel distortion. This image enhancement software was not integrated
into our prototype.
Parrot, the manufacturer of the AR drone, has licensing restrictions on software using
their API to interface with their drone. Our software interfaces with their API, so we
are restricted by their software license.
i