Download AMPERR Amplifier error automatic subroutine

Transcript
SYSTEM CONFIG
BV
Burn Variables and Array
BV
Usage
BV
Operands _BV
Command takes no arguments
Operand has special meaning, see Remarks
Description
The BV command saves the controller variables and arrays in non-volatile EEPROM memory. This command typically takes up to 2 seconds to execute
and must not be interrupted. The controller returns a : when the Burn is complete.
Arguments
The BV command has no arguments
Remarks
_BV returns the number of controller axes.
This command will store the ECAM table values in non-volatile EEPROM memory.
This command may cause the Galil software to timeout. This warning is normal and is designed to warn the user when the controller does not respond
to a command within the timeout period. This occurs because this command takes more time than the default timeout period. The timeout can be
changed in the Galil software. This warning does not affect the operation of the board or software.
Examples
'Galil DMC Code Example
:BV;' burn in variables
:'
colon response returned
©2015 Galil Motion Control. Corrections, Feedback: documentation@galilmc.com
Galil Motion Control
BV
100/313