Download AMPERR Amplifier error automatic subroutine

Transcript
SINE COMMUTATION
BB
Brushless Phase Begins
BBm= n
BB n,n,n,n,n,n,n,n
Usage
BBm= n
BB n ...
Operands _BBm
Arguments specified with a single axis mask and an assignment (=)
Arguments specified with an implicit, comma-separated order
Operand holds the value last set by the command
Description
The BB function describes the position offset between the Hall transition point and theta = 0, for a sinusoidally commutated motor. This is used when
doing hall initialization of a sine commutated drive.
Arguments
Argument
Min
m
A
n
-359.98
Max
A
359.98
Default
N/A
0
Resolution
Description
Axis
Axis to assign value
1/32
Phase offset of hall sensors
Notes
Remarks
This command must be saved in non-volatile memory to be effective upon reset.
Examples
'Galil DMC Code Example
BB ,30,,60;' The offsets for the Y and W axes are 30
and 60
respectively
'Galil DMC Code Example
BB 30;' set offset of 30 degrees for A axis
BB applies to DMC40x0,DMC21x3,DMC18x6,DMC18x2,DMC30010,DMC500x0,DMC52xx0
©2015 Galil Motion Control. Corrections, Feedback: documentation@galilmc.com
Galil Motion Control
BB
86/316