Download Release Notes
Transcript
7 Installation and Licensing The software to control the microscope and Leica DFC cameras can be used in accordance with the software license. You do NOT need to apply for a license key if this is your intended use. The remaining (optional) modules can be used for 60 days evaluation and must be licensed for extended use. The procedure for this is detailed in section 7.3. 7.1 Installing LAS The installation of the Leica Application Suite (LAS) is described in the document LAS Install Guide in the root folder of the LAS Disk . You should read this document before installing your copy. After installation, the document can be accessed from the Start Menu -> Leica Application Suite. Please read the document ‘System Requirements.pdf’ that is in the root folder of the LAS DVD for details of compatible hardware and software before continuing. Installing hardware for use with LAS Power Mosaic is also described in the ‘System Requirements.pdf. 7.2 Installing LAS Steel Expert This option is not installed by default. In order to install LAS Steel Expert, you need to select the Custom install if this is the initial installation of LAS or the Modify installation if you are adding to an existing installation. Scroll down to find Steel Expert and change the symbol from a cross to a file system picture and OK to install. 7.3 Licensing Optional Modules Note – if you are using LAS Core facilities only, a license file is NOT required. Do NOT start the evaluation period because this will give you a warning message for 60 days even if you do not evaluate any modules. Optional modules may be purchased from your local Leica sales office. The procedure, in brief, is as follows: 1. Place the order for the module/s. 2. You will receive a license number for the registration of these modules (each license might cover or one or more modules). 3. Fill out the information in the registration form accessed via LAS and send the form to the configuration centre - LASConfCent@leica-microsystems.com. 4. Receive a license file from the configuration centre and select this from the LAS License dialog. You will need have Administrator privileges to license LAS. LAS Release Notes Page 17