Download Here - Dell
Transcript
Managing Virtual Media 15 Virtual media allows the managed server to access media devices on the management station or ISO CD/DVD images on a network share as if they were devices on the managed server. Using the Virtual Media feature, you can: • Remotely access media connected to a remote system over the network • Install applications • Update drivers • Install an operating system on the managed system This is a licensed feature for rack and tower servers. It is available by default for blade servers. The key features are: • Virtual Media supports virtual optical drives (CD/DVD), floppy drives (including USB-based drives), and USB flash drives. • You can attach only one floppy, USB flash drive, image, or key and one optical drive on the management station to a managed system. Supported floppy drives include a floppy image or one available floppy drive. Supported optical drives include a maximum of one available optical drive or one ISO image file. The following figure shows a typical Virtual Media setup. • Virtual floppy media of iDRAC is not accessible from virtual machines. • Any connected Virtual Media emulates a physical device on the managed system. • On Windows-based managed systems, the Virtual Media drives are auto-mounted if they are attached and configured with a drive letter. • On Linux-based managed systems with some configurations, the Virtual Media drives are not automounted. To manually mount the drives, use the mount command. • All the virtual drive access requests from the managed system are directed to the management station across the network. • Virtual devices appear as two drives on the managed system without the media being installed in the drives. • You can share the management station CD/DVD drive (read only), but not a USB media, between two managed systems. • Virtual media requires a minimum available network bandwidth of 128 Kbps. • If LOM or NIC failover occurs, then the Virtual Media session may be disconnected. 261