Download User manual
Transcript
September 20, 2006 TM-4100GE Software Operation Manual 1 Software Introduction 1.1 Scope of the Document This manual describes how to access and use features specific to JAI PULNiX's Gigabit Ethernet camera, the TM-4100GE. The camera’s different operation modes are described in the hardware section of this manual, which begins on page 31. The TM-4100GE series consists of the TM-4100GE (monochrome) and the TMC-4100GE (color). Unless otherwise noted, all information contained in this manual is relevant to both models. 1.2 Related Documents The appendix contains descriptions of the TM-4100GE camera’s internal frame grabber and how to connect the camera. The appendix complements, and should be used in conjunction with the three following documents: • Cam2Net User’s Manual • Cam2Net IP Device Drivers • Cam2Net C++ SDK Reference Manual These documents are part of the GigE software package and are added to your system when the software is installed. 1.3 Gigabit Ethernet Camera Interface The GigE interface provides an easily connectable, high-bandwidth imaging solution, where video data is sent as IP packets over an industry-standard GigE network. TM-4100GE Software