Download Sampling and Analysis Guide
Transcript
Sampling and Analysis Guide WipWare 7.4 Light Placement Position lights equal distances to left and right of camera position and as far apart as possible. Position lights as high as possible. Aim light on right towards left edge of drift (approx. 45 degrees from lens axis). Aim light on left towards right edge of drift (approx. 45 degrees from lens axis). Crossing the lights in this manner will produce the most even illumination, reducing ’hot-spots’. If lighting angle is less than 15 degrees from lens axis, shadow formation will be less than ideal. If lights are positioned too close to the muckpile, the resulting fall-off in intensity will mean that particles near the back of the pile receive significantly less illumination than the front of the pile. As light-to-subject distance increases falloff is reduced. Page 19