Download Bootstrap Yourself with Linux-USB Stack
Transcript
Linux USB Host Subsystem Figure 3.9 Menuconfig option displaying USB CDC option. Sometimes you need to add serial console support to your device to emulate a terminal console over serial port. The following option enables you to set serial console support. config USB_SERIAL_CONSOLE bool "USB Serial Console device support" depends on USB_SERIAL=y When a USB device doesn’t have a serial driver of its own, enable this generic driver so that a host can detect it at runtime. You can specify insmod usbserial vendor=V-ID product=P-ID, where V-ID and P-ID are the vendor and product ID of your device. config USB_SERIAL_GENERIC bool "USB Generic Serial Driver" When it’s configured to generate as a module, the makefile generates usbserial. ko, allowing you to load and unload the module dynamically. CDC Ethernet Support The other important class of USB is the Ethernet class, which is available in most of the embedded systems that support USB. This feature is needed only in a USB host system to support such devices that provide CDC Ethernet support. The following option enables a USB host to support USB CDC devices. Figure 3.9 illustrates the CDC class menu when you run a make menuconfig, which is outside the USB menu option. The following configuration from drivers/net/usb/Kconfig file provides the necessary menu options to configure the USB host CDC support. # # USB Network devices configuration # comment "Networking support is needed for USB Network Adapter support" depends on USB && !NET n 39