Download user manual - solidThinking
Transcript
Section 4 Arc: tangent, 2 points Draws an arc by defining a tangent curve, a point on such a curve and another point in space. How to use 1. Click the Arc: tangent, 2 points icon or choose the Tools4Curves4Arc4Arc: tangent, 2 points command. 2. The program console prompts Point on curve. 3. Click a point on the curve at the Point on curve console prompts. This will be the start point of the arc. 4. Place the second point at the End point console prompt. This point can be anywhere in the space. You can insert points in any view regardless of where you have started. To interactively define the arc, hold the mouse button down after the click or click while pressing the Shift key. . 308 solidThinking User Manual
Related documents
solidThinking Manual 1 - Modeling
User Manual Vol. 1 Modeling
user manual - solidThinking
User Manual Vol. 3 Rendering
SynCheckII™ - Pharoah Editorial, Inc
SynCheckII™ - Pharoah Editorial, Inc
MeditConcept 5 User Manual
Pervasive.SQL V8 User's Guide
Model 269 Photomultiplier Base Operating and Service Manual
Toshiba G8000 Power Supply User Manual
Manuel d`utilisation et d`entretien