Download FreFlow - Tapflo
Transcript
EC Declaration of conformity (valid until 30-12-2009) (Directive 98/37/EC, appendix II-A) Manufacturer SPX Process Equipment NL B.V. Dr. A.F. Philipsweg 51 P.O. Box 9 9400 AA Assen The Netherlands hereby declares that the pump, in case it is delivered as an assembly with drive (last position of serial number = A), is in conformity with the provisions of Directive 98/37/EC (as altered most recently) and the following directives and standards: • EC directive 2006/95/EG, "Electric equipment for use within certain voltage limits" • standards EN-ISO 12100 part 1 & 2, EN 809 The pump to which this declaration refers may only be put into operation after it has been installed in the way prescribed by the manufacturer, and, as the case may be, after the complete system of which this pump forms part, has been made to fulfil the requirements of Directive 98/37/EC (as altered most recently). Manufacturer's declaration (valid until 30-12-2009) (Directive 98/37/EC, appendix II-B) Manufacturer SPX Process Equipment NL B.V. Dr. A.F. Philipsweg 51 P.O. Box 9 9400 AA Assen The Netherlands hereby declares that the pump, in case it is delivered without drive (last position of serial number = B), is in conformity with the following standards: • EN-ISO 12100 parts 1 & 2, EN 809 and that this pump is meant to be incorporated in or combined with another machine (electric motor, combustion engine) and may only be put into use after the complete machine of which the pump under consideration forms part has been made and declared to comply with that directive. Assen, November 1st 2009 G.A. Schaafsma, General manager EC/EN (0911) 5.0 1