Download PICED Programmer`s Guide

Transcript
Home Management Series
PICED Programmer's Guide
4. Add the power value:
Open the Tools form
Select the Power Meter category
Select Power
Click on OK and place the Component on the form
Example 2
To display the daily total energy usage over the last week as shown above:
1. Add a Graph Component
2. Select the graph In-built System IO properties:
Key Function: Status
In-Built System IO Variable: Power Meter Total Energy
Meter Tariff: All Meters
Units: Watt Hours
Period: 1 day
Offset: 0
Data Type: To Date (select predicted if you want today's energy bar to show the predicted
value)
3. Select the Graph properties:
Graph Type: Bar
Points: 7
Tick/Grid Spacing: 1 (x 1 day)
Show Tick Marks
Show Values
Vertical Axis Maximum: 40 (or select value to suit)
4. Scale the data:
Select the Value Tab
Select System IO Value Custom
Gain: 0.001 (converts Watt Hours to kWh)
4.25.12.7 Reactive Power
In an AC power system, there are two components of power:
Real Power: This is the power that does actual work, and is what your energy provider power
meter records and you pay for. It is measured in Watts.
Reactive Power: This is power which circulates in the wiring due to inductive or capacitive loads,
but does no useful work. It is measured in VAR.
The (vector) sum of the Real Power and Reactive Power is known as the Apparent Power.
The ratio of Real Power to Apparent Power is known as the Power Factor:
Power Factor = Real Power / Apparent Power
Some power meters measure Real Power. These are ideal because their reading will agree with the
© Copyright 2014 Schneider Electric (Australia)
Page 261