Download DEVICENET SLAVE MODULE
Transcript
Modified September 28, 1999 5:26 pm DEVICENET SLAVE MODULE System Setup Various DeviceNet compliant devices can be connected to the DeviceNet network. The DeviceNet network requires a DeviceNet master module available from other vendors. The OpenNet Controller can make up a slave station by installing the FC3A-SX5DS1 module to the right of the OpenNet Controller CPU module. A maximum of seven OpenNet interface modules and analog I/O modules can be mounted with one OpenNet Controller CPU module. DeviceNet Master Station DeviceNet STATUS MODULE NET ADDRESS/ERROR Example: Rockwell Automation SLC Processor with 1747-SDN DeviceNet Scanner DeviceNet Network POWER POW MNS IO RUN ERROR HSC OUT COM A NO H/L DR1 DR0 NA5 NA4 NA3 NA2 NA1 NA0 0 1 2 3 4 5 6 7 10 11 12 13 14 15 16 17 B RS485 Z HSC OUT A B G +24V 0V IDEC SX5D Communication Terminal idec IDEC OpenNet Controller CPU Module I/O Module DeviceNet Slave Module FC3A-SX5DS1 IDEC SX5D Communication Terminal Other DeviceNet Compliant Devices 2 OPENNET CONTROLLER DEVICENET SLAVE MODULE USER’S MANUAL