Download Lysimeter
Transcript
Smart Field Lysimeter Sensor ports for MPS2 and 5TE sensors Inside: Pressure sensor for VTENS Data cable to Lysimeter bottom and data logger Tube for VTENS pressure connection to suction cup in the Lysimeter bottom Figure 13: Lysimeter sensor distribution box 3 Sensors 3.1 Reference Tensiometer T8 (Field) Figure 14: T8 Tensiometer The reference Tensiometer is dug into the soil close to the Lysimeter (see separate page „Earth works and basic set-up”). The measurement values of the Tensiometer are used by the feedback control to adjust the lower hydraulic boundary condition. 3.2 Matrix potential sensor MPS2 (Lysimeter) Figure 15: MPS2 sensor The MPS2 sensor measures the matrix potential (or the tension respectively). It uses the Echo technology to determine the water content of a porous matrix. The water content within the porous matrix correlates with the matrix potential. Page 15 of 68