Download Lysimeter

Transcript
Smart Field Lysimeter
Sensor ports
for MPS2 and
5TE sensors
Inside:
Pressure sensor for VTENS
Data cable to Lysimeter
bottom and data logger
Tube for VTENS
pressure connection
to suction cup in the
Lysimeter bottom
Figure 13: Lysimeter sensor distribution box
3 Sensors
3.1 Reference Tensiometer T8 (Field)
Figure 14: T8 Tensiometer
The reference Tensiometer is dug into the soil close to the Lysimeter (see separate
page „Earth works and basic set-up”). The measurement values of the Tensiometer
are used by the feedback control to adjust the lower hydraulic boundary condition.
3.2 Matrix potential sensor MPS2 (Lysimeter)
Figure 15: MPS2 sensor
The MPS2 sensor measures the matrix potential (or the tension respectively). It uses
the Echo technology to determine the water content of a porous matrix. The water
content within the porous matrix correlates with the matrix potential.
Page 15 of 68