Download 6. Configuring the Gateway
Transcript
6. Configuring the Gateway 6.12.3. Adding a Special Modbus Command Apart from the standard Modbus commands covered in the previous chapter, it is possible to create two types of special Modbus commands: Modbus commands using the same template as standard commands and Modbus commands whose nature and frame content can be completely changed by the user. 6.12.3.1. Modbus Commands Based on Standard Commands You create a command of this type from the “Select Command” window (see chapter 6.12.2), by choosing “Add Command” from the “Command” menu. The window shown at the top of the next page appears. It shows the structure of the future command’s query and response frames, which will then be added to the list of available Modbus commands. This structure includes the standard elements, that is to say the “Slave Address”, “Function” and “Checksum” fields, described in previous chapters. Please see chapter 2.12 Command editor in the ABC-LUFP Config Tool user manual, entitled AnyBus Communicator – User Manual, for further information about creating standard Modbus commands. 1744088 03/2009 89