Download Manually

Transcript
4. To add External Storage, click Add and enter the storage Samba path:
IMPORTANT. If using Network Storage, the computer Media Server is installed on must
have non password read-write access to the Samba share. The most convenient way is to mount
it as local disk (via Samba).
5. Click OK. At this point, all Storages will be checked for validity and ability to write to. If the
drive has insufficient space, a warning will appear.
The Storage structure on the partition is as follows: <drive>/N Spectrum
Media/$Resolution/$MAC/$YYYY/$MM/$DD/$HH:
 $Resolution:
 hi_quality – full resolution streams
 lo_quality – low resolution streams
 $MAC – MAC address of the recorded device
 $YYYY – Recorded Year
 $MM – Recorded Month
 $DD – Day
 $HH – Hour
IMPORTANT. 5 GB of free space is always preserved on Storage.
3.4 Deleting Media Server (Admin Only)
In some instances, it may be necessary to delete Media Server from the system.
Note: Media Server can only be deleted when offline.
To delete Media Server, locate it in Resource Tree, Right-Click for Context Menu and select
Delete.
IMPORTANT. All cameras that are hosted on this specific server will be deleted as well.
Recorded data will be kept in server’s storages.
Media Server will automatically be registered in EC, discover all Cameras and start operating
once it is back online. The deleted camera's archive will remain available. It will be required to
perform all storage settings and configure all discovered Cameras again.