Download TEST REPORT

Transcript
QUINEL
page 2 of 31
Report reference No: T1321-21-12
Test verdicts:
- test item does not apply to the tested object:
N
- test item meets the requirement:
P
- test item does not meet the requirement:
F
- test item not checked:
--
General remarks:
For the acceptance of the components see Table 1 "Safety relevant components"
The test results presented in this Test Report relate only to the tested luminaire(s).
This Test Report has to be read together with the standards.
This Test Report shall not be reproduced except in full.
Remarks:
The electronic part (on PCB) has been tested by simulating possible fauts following EN 61347-1.
The enclosure is mounted with pins and then glued.
For the assessment and tests used documents provided by the applicant or
manufacturer
- Montageanleitung / Assembly Instructions by the manufacturer
- Certificates and specification of components and plastic enclosure (see Table "Safety relevant
components")
- Circuit diagram of electronic circuit
- Lay-out of PCB