Download User`s Guide for SNOPT Version 7.4 - CCoM

Transcript
88
Code
SNOPT 7.4 User’s Guide
Meaning
c
Central differences have been used to compute the unknown components of the
objective and constraint gradients. A switch to central differences is made if either
the linesearch gives a small step, or x is close to being optimal. In some cases,
it may be necessary to re-solve the QP subproblem with the central-difference
gradient and Jacobian.
d
During the linesearch it was necessary to decrease the step in order to obtain a
maximum constraint violation conforming to the value of Violation limit.
l
The norm-wise change in the variables was limited by the value of the Major
step limit. If this output occurs repeatedly during later iterations, it may be
worthwhile increasing the value of Major step limit.
i
If SNOPT is not in elastic mode, an “i” signifies that the QP subproblem is
infeasible. This event triggers the start of nonlinear elastic mode, which remains
in effect for all subsequent iterations. Once in elastic mode, the QP subproblems
are associated with the elastic problem NP(γ).
If SNOPT is already in elastic mode, an “i” indicates that the minimizer of the
elastic subproblem does not satisfy the linearized constraints. (In this case, a
feasible point for the usual QP subproblem may or may not exist.)
M
An extra evaluation of the problem functions was needed to define an acceptable
positive-definite quasi-Newton update to the Lagrangian Hessian. This modification is only done when there are nonlinear constraints.
m
This is the same as “M” except that it was also necessary to modify the update to
include an augmented Lagrangian term.
n
No positive-definite BFGS update could be found. The approximate Hessian is
unchanged from the previous iteration.
R
The approximate Hessian has been reset by discarding all but the diagonal elements. This reset will be forced periodically by the Hessian frequency and
Hessian updates keywords. However, it may also be necessary to reset an illconditioned Hessian from time to time.
r
The approximate Hessian was reset after ten consecutive major iterations in which
no BFGS update could be made. The diagonals of the approximate Hessian are
retained if at least one update has been done since the last reset. Otherwise, the
approximate Hessian is reset to the identity matrix.
s
A self-scaled BFGS update was performed. This update is used when the Hessian
approximation is diagonal, and hence always follows a Hessian reset.
t
The minor iterations were terminated because of the Minor iterations limit.
T
The minor iterations were terminated because of the New superbasics limit.
u
The QP subproblem was unbounded.
w
A weak solution of the QP subproblem was found.
z
The Superbasics limit was reached.