Download Empi Quick Start Guide

Transcript
Device Set Up
6
General Joint and Spine Pain-Electrode Placement
6
7
4
5
1 Connect lead wires to the electrodes and to TENS device.
2 Clean skin in the treatment area.
Dry thoroughly.
3 Apply electrodes around area of pain as instructed by your health
care provider.
4 After placing the electrodes,
turn TENS device on by pressing
“on/off” button.
5 Select the appropriate body specific program.
6 Increase both channels on “ch1 and ch2” to a strong but comfortable level.
7 To unlock device press “down arrow.”
Shoulder Pain
Upper Back Pain
Treatment Time
30-60 minutes
3-4 times per day
or as prescribed
Treatment Time
30-60 minutes
3-4 times per day
or as prescribed
Electrode Placement
Place electrodes
surrounding the
painful site using a
bracketed method.
Electrode Placement
* Please see user manual for detailed instructions.
* These electrode placements serve only as a guide and will vary by indication and individual patient needs. Specific electrode
placement or treatment plans should be determined by the physician.
Setting/Mode
Quick Shoulder Setting,
Burst or SMP
Setting/Mode
Quick Back Setting
or Burst
Single Channel
Place electrodes
unilaterally on
paraspinals at proximal
and distal pain limits.
Dual Channel
Place electrodes at
paraspinals, at proximal
and distal pain limits,
in a crossed pattern.