Download Operator`s Guide
Transcript
2.5.4 Mimic menus and related toolbar icons 2-41 The Browser Window 2-42 2.6.1 Item/Measurement Selector 2-42 2.6.2 Floating menu 2-43 2.6.2.1 Displaying AutoDiagnosis™ messages for a machine (component) 2-44 2.7 Working with predefined plots 2-45 2.7.1 How to make a Single Plot Report 2-45 2.7.2 How to make a Multiple Plot Report 2-46 2.7.3 User defined plots 2-46 2.7.4 How to open a user defined plot 2-47 2.7.5 Navigation facilities of a plot 2-48 2.7.5.1 Zooming by selecting 2-48 2.7.5.2 Zooming, moving and scrolling using shortcuts 2-48 2.7.5.3 Zooming to fit to the actual data 2-48 2.7.5.4 Zooming out by a factor of 1/2 2-49 2.7.5.5 Scrolling the selection one grid-width using the mouse 2-49 2.7.5.6 Cursor position readout 2-49 2.7.5.7 The date & time format 2-50 2.7.5.8 Peak position readout 2-50 2.7.5.9 Changing data-period for a scalar plot window 2-50 2.8 Off-line data collector (special module) 2-52 2.8.1 Uploading the route to the data collector 2-52 2.8.2 Downloading the tour-data from the data collector 2-52 2.9 Bearing Wear Monitoring (special module) 2-53 2.9.1 Basic principles 2-53 2.9.2 BDC baseline calibration 2-55 2.9.2.1 Background 2-55 2.9.2.2 Reset Zero Gap / Recalculate BDC Baseline 2-55 2.9.2.3 Set Initial Wear 2-57 2.9.2.4 Explanation to the baseline calculations 2-58 2.9.2.5 Reset zero gap/Recalculate BDC Baseline – what happens? 2-59 Server starting and rebooting procedures 2-60 2.9.3 Starting/closing the OPENpredictor™ system 2-60 2.9.3.1 Start the Server Computer and software 2-60 2.9.3.2 Closing down the system 2-60 2.9.4 SPU rebooting procedures 2-61 2.9.4.1 Remote reboot of the SPU 2-61 2.9.4.2 On-site reboot of the SPU 2-62 2.9.4.3 On-site power cycling of the SPU 2-62 2.9.5 Stopping and restarting the Data Server only 2-62 2.9.6 How to verify that the System is operating properly 2-62 2.10 OPENpredictor™ System Hardware 2-64 2.10.1 The RO2000 Signature Processing Unit (SPU) 2-64 2.10.2 The RO2010 Communication Processor Module (CPM) 2-65 2.10.3 The RO2020 Signal Processor Module (SPM) 2-66 2.6 3 Glossary 3-1 4 Index 4-2 Document information 4-4 2008-11-20 OPENpredictor™ 2.8.0 Operator's Guide Issue 2.2 Page 1-2