Download Test Report
Transcript
Test item particulars: Operation condition …………………………..: Continuous Tested IT power system …………………...…: No IT testing, phase-phase voltage (V) ………...: N/A Class of equipment ……………….……….…: Class I Mass of equipment (kg) ..............................: Mention in user manual(68KG) Mains supply tolerance (%)………………..…: +10%, -10% Protection against ingress of water …………: IP20 Possible test case verdicts: - test case does not apply to the test object: N/A - test object does meet the requirement: P (Pass) - test object does not meet the requirement: F (Fail) General remarks: The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. "(see appended table)" refers to a table appended to the report. “(see remark #)” refers to a remark appended to the report. “(see Annex #) refers to an annex appended to the report. Throughout this report a comma (point) is used as the decimal separator. General Product information: All models are with same principle, constructional and insulation,just different the Capacity and the model names. Summary of Testing and Conclusions: The Uninterruptible Power Systems was tested and complied with the requirements of EN 62040-1:2008. Copy of marking plate: Uninterruptible Power Systems Model: EA8810 Input: AC 230V, 50HZ, 45.5A Battery:DC 192V Output: AC 230V, 50HZ, Capacity:10KVA, Manufacture Date: August, 2012 Guangdong East Power Co., ltd. MADE IN CHINA Report No.: MTS/GEG/D12110968 Page 3 of 30