Download Camera User Guide
Transcript
Power, Ethernet and MAC ID DO NOT connect power and Ethernet until instructed to do so by the web site, during the enrollment process. WCW100 XXXXXXXXXX XXXXXXXXXX MAC ID is located on the label on the back of the camera. IC ID: 7954A WPS LAN Speaker OUT POWER 5V/1A Power and Ethernet Privacy Button The privacy button can be used to temporarily suspend video transmission. Enable Privacy Press the privacy button. Button will light green when activated. Privacy Button Disable Privacy Press the privacy button. Green light will go out when video transmission resumes. R WE PO K OR TW NE Privacy Button WPS Button WCW100 XXXXXXXXXX XXXXXXXXXX NOT use the WPS button. Pushing this button may prevent the camera from enrolling to the LiNK system properly. IC ID: 7954A Do Not Use If the button is accidentally pushed, power must be disconnected and then reconnected to the camera before enrolling the camera. WPS LAN Speaker OUT POWER 5V/1A WPS Button Reset Button Do Not Use DO NOT use the reset button. If this button has been pressed, you will need to first remove and then add the camera back into your account. See Enrolling the Camera for more information. R POWE ORK NETW Reset Button