Download avr-libc-user-manual..

Transcript
7.2
avr-libc and assembler programs
7.2.3
60
Example program
The following annotated example features a simple 100 kHz square wave generator
using an AT90S1200 clocked with a 10.7 MHz crystal. Pin PD6 will be used for the
square wave output.
#include <avr/io.h>
; Note [1]
work
tmp
=
=
16
17
; Note [2]
inttmp
=
19
intsav
=
0
SQUARE
=
PD6
tmconst= 10700000 / 200000
fuzz=
8
; Note [3]
; Note [4]:
; 100 kHz => 200000 edges/s
; # clocks in ISR until TCNT0 is set
.section .text
.global main
; Note [5]
main:
rcall
ioinit
rjmp
1b
1:
.global SIG_OVERFLOW0
SIG_OVERFLOW0:
ldi
inttmp, 256 - tmconst + fuzz
out
_SFR_IO_ADDR(TCNT0), inttmp
1:
2:
in
intsav, _SFR_IO_ADDR(SREG)
sbic
rjmp
sbi
rjmp
cbi
_SFR_IO_ADDR(PORTD), SQUARE
1f
_SFR_IO_ADDR(PORTD), SQUARE
2f
_SFR_IO_ADDR(PORTD), SQUARE
out
reti
_SFR_IO_ADDR(SREG), intsav
sbi
_SFR_IO_ADDR(DDRD), SQUARE
ldi
out
work, _BV(TOIE0)
_SFR_IO_ADDR(TIMSK), work
ldi
out
work, _BV(CS00)
; tmr0:
_SFR_IO_ADDR(TCCR0), work
; Note [6]
; Note [7]
; Note [8]
; Note [9]
ioinit:
Generated on Mon Dec 9 22:14:31 2002 for avr-libc by Doxygen
CK/1