Download User`s Guide
Transcript
Chapter 5: Reviewing Images The Customize tool allows you to change the way the Magnify tool works. Click the Customize tool to open the Advanced Magnification dialog box. Specify the desired height and width of the Magnify tool area (in pixels). In the Zoom text box, specify the desired amount of magnification. The Zoom tool allows you to zoom in to or out of an image. Click the Zoom tool, and then click and drag the mouse. Move up to zoom out (the image gets smaller) or down to zoom in (the image gets larger). Note: Be sure to release the mouse button completely between zooming in one direction and zooming in the other direction. Also, be sure that the mouse pointer is within the Cornerstone window when you click to begin the zoom action. TIP: When you click the Zoom tool, you can also use the scroll wheel on your mouse to zoom in and out. The Pan tool allows you to click and drag the image to move it within the window. The Invert tool automatically inverts the colors in your image—white becomes black, and black becomes white. The Crop tool allows you to cut out unwanted parts of an image. To crop an image, select the tool, then click and drag the crop border so that it contains the part of the image you want to keep. Right-click inside the border, and select Apply Crop. The image is cropped to the selected area. Tips: • To adjust the border, click and drag an edge of the rectangle. • To rotate the crop area, click and drag one of the corners. Note: You might want to rotate the crop area to adjust the appearance of the image. For example, if the patient and the image detector/cassette were not aligned and collimation produced an irregular white area, you could crop to exclude it from the image. The Restore Original tool allows you to return the image to the way it looked when you clicked Done Capture at the end of the image capture process. 47