Download Switchvox Administration Reference Manual
Transcript
Call Routing Fax Settings Tab The Fax settings determine how faxes are handled with this provider. You must install a fax license and the fax software to make faxing available. For details, see “Digium Addon Products” page 80. IMPORTANT: We recommend that you only send T.38 faxes over SIP. We do not recommend sending faxes over IAX connections. Switchvox cannot necessarily recognize a fax over an IAX connection. Error Correction Mode for G711 Faxes. The default is to leave this feature enabled. Minimum transfer rate for fax transmissions. Minimum transfer rate used during fax rate negotiation. The default minimum transfer rate is 2400. Maximum transfer rate for fax transmissions. Maximum transfer rate used during fax rate negotiation. The default maximum transfer rate is 14400. RSA Key RSA keys can be used for authenticating peers using IAX. This is not usually necessary when using commercial IAX providers, but it can be handy when peering multiple IAX-compatible PBXs together. Click Download to save the current RSA key. Then you can upload it to other phone systems when you create or modify an IAX Provider on that system. You can rename this RSA key to something unique to this Switchvox PBX: Enter a new name in the Rename RSA key field, then click Rename. This can help you identify keys as you set up peered PBX systems. For example, you may name this key bostonoffice and another system’s key londonoffice. RTP Port Range These are the source ports used for establishing the RTP media pathway for SIP calls. It is unlikely that you will need to change this setting. Only change it at your provider’s request. Outgoing Calls The Outgoing Calls tools let you handle all aspects of outgoing calls. It is comprised of three tabs: Outgoing Call Rules; Caller ID Rules; and Call Diagnostics. All rules are displayed in a table on the Outgoing Call Rules page. Clicking the Create Outgoing Call Rule button displays the Outgoing Call Rule page. Outgoing Call Rules An outgoing call rule is a dialing pattern and associated routing information. For example, the International outgoing call rule is triggered when a user dials “9011” followed by 7 to 13 digits. Such calls are sent to the selected route (such as a VoIP provider or a Channel Group). Switchvox Admin Reference Manual 53