Download Manual - Sin

Transcript
entered, the pump offers three options: Head and tube; Tube; and
Calibration dose. If Change is selected with no security code in place, the
three options are displayed immediately.
Use the UP and DOWN keys to make a selection. Press ENTER to confirm.
Head and tube
If Head and tube is selected, the pump displays a list of standard pumpheads
that can be fitted to the pump.
Use the UP and DOWN keys to make a selection. Press ENTER to confirm.
Examples are shown here.
The pump displays tube sizes, as below.
Tube
If Tube is selected or a pumphead choice has just been made, the pump displays a list of standard tube sizes that can be used in the pumphead previously
identified. An example is shown here.
Use the UP and DOWN keys to make a selection. Press ENTER to confirm.
The pump offers to run a calibration dose, as below.
Watson-Marlow 620DiN, 620Di User Manual
49