Download Pro Linux Embedded Systems
Transcript
CHAPTER 6 ■ CREATING A LINUX DISTRIBUTION FROM SCRATCH You set this value through the kernel configuration tool by running the following: $ make ARCH=arm menuconfig The following appears before the configuration menu, during compilation of the software that draws the configuration menu. This happens the first time the kernel menu configuration programs runs: (clipped) HOSTCC HOSTCC HOSTCC HOSTCC HOSTCC (clipped) scripts/kconfig/lxdialog/inputbox.o scripts/kconfig/lxdialog/menubox.o scripts/kconfig/lxdialog/textbox.o scripts/kconfig/lxdialog/util.o scripts/kconfig/lxdialog/yesno.o Look for Boot Options in the Linux kernel configuration top level screen, as shown in Figure 6-2 Figure 6-2. The Linux Kernel Configuration top level menu The settings for the kernel command line are at the following menu location: Boot Options ➤ Default Kernel Command String. To change the settings, highlight the item in the menu, and press Enter. The window shown in Figure 6-3 appears on screen. 136 www.it-ebooks.info
Related documents
Nikon D2H Operators Manual
Nikon Camcorder D2H User's Manual
Job Submission
Getting Started With Visionscape Framegrabber Boards
SAM9-L9261 LINUX DEVELOPMENT BOARD WITH SAM9261
Polycom RSS 2000 User Manual
OpenEmbedded - Free Electrons
smxNAND User's Guide (NAND Flash Driver)
SAM9-L9261 user manual
Konica Minolta 181 Network Card User Manual