Download User manual
Transcript
“Network Energomonitoring” Software User’s Manual Start date/time and stop date/time. They define the logging interval i.e. a certain period of time within which raw data had been acquired from the object. Note that American (MM/DD/YY) date format is used to indicate start and stop dates. Remember that “object” means an entity (enterprise, plant, etc.) involved in electric power generation or consumption. An object is assigned a unique name whenever network monitoring activities are conducted using an EM Device and EmWorkNet6 program. Connection scheme (network type); Network nominal values i.e. phase and line voltages (V) and frequency (Hz); 2. Events table just below the “preface” describes at length each deep or swell in chronological order. 3. A panel named “Graph (dips and swells)” graphically represents the same sequence of events. Events table Notes: 1. Dip and swell thresholds are considered to be 0.9 Unom. and 1.1 Unom. , respectively. 2. “Value” on top of the rightmost column means depth of a dip (Udip) or height of a swell (Usw). 3. Depth of a dip and height of a swell are both considered to be the actual voltage (measured during the event) expressed in % of network nominal voltage. For instance: Udip = 1.30% in the table means that voltage during the dip period was just 1.30% of the nominal (i.e. 98.70% voltage drop occurred). Legend (see Fig. 3.5.1): “Start” – date and time when an event had been detected; “End” – date and time when the event had terminated; “Duration” – self-explanatory; “Phase” indicates the phase affected by the event. “Value” – see “Notes” above. “Graphs (dips and swells)” panel The panel is resizable. To adjust the size, drag the panel’s upper boundary to a desired position. Dips/swells periods are dyed pink, whereas periods without dips/swells are left pale. Each dip’s depth or swell’s height on the graph reflects its respective value in “Events table”. Blue pointer above the graph always marks start time of the event selected in the table. Blue pointer moves when you select some other line in “Events table”. “Graph (dips and swells)” panel can pop up as a mini-window above the active EmWorkNet6’s window. Clicking on it with right mouse button brings up the respective contextual menu. Items of the menu are as follows: “Copy” 79