Download DRM-3000

Transcript
Circuit Board Descriptions
(A) ACFB unit. Connects to the AC line cord input and power switch. Contains a
AC line filter and main 6.3 amp 250 volt fuse.
(B) PFCB unit. Power Factor Improvement Module. Receives AC input from
ACFB unit and provides the AC supply for the three power supplies. (C), (D)
and (E).
(C) +5 Volt Power Supply. Supply for PCB units and bays.
(D) +12 Volt Power Supply. Supply for PCB units and bays.
(E) +24 Volt Power Supply. Supply for VMDB unit (Vertical Motor Drive
board).
(F) PIF1 unit. Power interface assembly for rear bays 1~4.
(G) PIF2 unit. Power interface assembly for rear bays 5~8, DC fan power
connector and fan FG circuit.
(H) MMCB unit. Main Microprocessor Circuit Board. This unit contains the
main CPU, SCSI interface, Flash Rom and integrated circuit protectors for
+5 and +12 volt supplies.
(I) FCNB unit. Interconnect from MMCB to DCMB1 units. Contains the
up/down interrupter LED’s for vertical drive motor stop position. (Fixed).
(J) TMNB unit. Contains the SCSI termination switch and provides the feed
through from the MMCB to the IDSB units.
(K) IDSB unit. SCSI ID selector for the changer.
(L) MIF2F unit. Touch Memory Interface Assembly. Connects from touch
memory units (M, N and O) to the MMCB unit. (See service manual for
locations of magazine touch memory units).
(P) MIF1R unit. Touch Memory Interface Assembly. Connects from touch
memory units (Q, R, S and T) to MMCB unit.
(U) DIFB3 unit. Rear Bay 1~4 SCSI Terminal Interface.
(V) DIFB4 unit. Rear Bay 5~8 SCSI Terminal Interface.
(W) VMDB unit. Vertical Motor Drive Board. Contains the vertical motor drive
circuit, door switches and front/rear door plunger drivers.
13.