Download 9065 Programmer Manual

Transcript
Commands
SI
Sets compressed printing. (EPSON)
ASCII Code
SI
Hexadecimal Value
OF
Decimal Value
15
This command is accepted at any position within the line. DC2 code cancels the compressed
printing: The setting of this command depends on the horizontal spacing previously set
10 CPI
12 CPI
Proportional
→
→
17 CPI
20 CPI
½ width
DC2 code cancels the condensed printing.
SO
Sets double width printing (one line). (IBM/EPSON)
ASCII Code
SO
Hexadecimal Value
0E
Decimal Value
14
This code causes subsequent data in the same line to be printed as double width characters. It is
cancelled by the CR, LF, VT, FF and DC4 codes o when the buffer is full.
51