Download this file

Transcript
4
RECEIVE AND TRANSMIT
D Transmit frequency monitor check
You may be able to receive the other party’s transmit
signal directly (called ‘listening on the repeater input’)
without having to go through a repeater.
Transmit frequency monitor check (XFC) allows you
to check this.
[MENU/GRP]
[F-4]
SPCH
/LOCK
q Select M-1.
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group M.
• Push [MENU/GRP] momentarily one or more times to
select the menu M-1.
1.8
10
21
w While receiving, push and hold [F-4 XFC] to see if
you can receive the other party’s transmit signal directly.
50
1
4
7
.
3.5
14
24
TUNER
/CALL
MW
F-1
F-2
2
5
8
144
0
• While holding [F-4 XFC], the offset direction and frequency are displayed above the multi-function key indicator.
7
18
28
XFC
XFC
V/M
3
MODE
6
FIL
9
GENE
430
CE
F-INP
ENT
HM-151
D Auto repeater function (USA version only)
This function automatically activates the repeater settings (DUP– or DUP+ and/or tone encoder ON/OFF)
when the operating frequency falls within the general
repeater output frequency range and deactivates
them when outside of the range.
Set the auto repeater function ON-1 (auto duplex setting) or ON-2 (auto duplex setting and activating tone
encoder) in the miscellaneous (others) set mode in
advance (p. 130). When ON-1 or ON-2 are turned on,
repeater settings are automatically activated according to the table below right.
[AF]
[MENU/GRP] [F-1] [F-2] [F-4]
[DIAL]
ON-1 sets the duplex setting and ON-2 sets the duplex setting and tone encoder automatically.
q Push [AF(SET)] momentarily to enter the set mode
menu.
w Push [F-4 OTH] to enter the miscellaneous (others) set mode.
Auto Re e Push [F-1 ≤] or [F-2 ≥] to select “A
peater.”
r Rotate [DIAL] to select the desired auto repeater
condition from ON-1, ON-2 and OFF.
• Push [F-4 DEF] for 1 sec. to return to default setting.
Z(MENU/GRP)] twice to return to the normal
t Push [Z
operating mode.
65
• Frequency range and offset direction (for USA)
FREQUENCY RANGE
51.620–51.999999 MHz
52.500–52.999999 MHz
53.500–53.999999 MHz
145.200–145.499999 MHz
146.610–146.999999 MHz
147.000–147.399999 MHz
442.000–444.999999 MHz
447.000–449.999999 MHz
DUPLEX DIRECTION
minus duplex
minus duplex
plus duplex
plus duplex
minus duplex