Download Star-Hspice Quick Reference Guide

Transcript
Level 4 JUNCAP Diode Model
peri
Length of the side-wall of the diffusion area
AB which is not under the gate. In the
model card, it is used by LS
pgate
Length of the side-wall of the diffusion area
AB which is under the gate. In the model
card, it is used by LG
off
Sets initial condition to OFF for this
element in DC analysis. The default is ON
M
Multiplier to simulate multiple diodes in
parallel. All currents, capacitances and
resistances are affected by setting M.
Default=1
ic
Initial voltage across the diode element.
This value is used when the UIC option is
present in the .tran statement and is
overridden by the .ic statement
Dtemp
The difference between the element
temperature and circuit temperature in
celsius. Default=0.0
.option list
Prints the updated temperature parameters
for juncap diode model
Star-Hspice Quick Reference Guide
6-13