Download caution

Transcript
Configuration and structure of measuring system
Yamatake Corporation
1-1 : Loop configuration
1-1-1 : Measuring system
Introduction
This instrument is an electromagnetic flowmeter and outputs analog and pulse or contact output. It measures the flow rate of a conductive fluid flowing in the sensor and
outputs a signal according to the set range.
Concept of flow rate measurement by this instrument
The concept of a flow rate measuring system using this instrument is shown.
Output
signal
Analog output
Pulse output
Contact output
Fluid
Figure 1-1 Conceptual drawing of measuring system (integral type)
Analog output
If instantaneous flow rate values are to be output as an analog variable to control
equipment, configure the system to deliver an analog output.
Pulse output
As a pulse output, the open-collector output is available. Pulse frequencies up to 200
Hz can be delivered. The pulse output can be delivered simultaneously with an analog
output.
Contact output
Instead of the pulse output, a contact output is available using the open-collector output. The contact output can be delivered simultaneously with an analog output.
1-2
Model MCB10A