Download Untitled

Transcript
IS300 Series Servo Drive User Manual
Preface
Preface
The IS300 series servo drive is specially designed for the permanent magnet synchronous
servo motor, and implements high-performance vector control on the motor. Integrating
process control (such as precise control of injection speed and pressure holding) during
driving of the injection molding machine and stability control during cooperation with the
injection molding machine controller, the IS300 series servo drive can well control the servo
pump and provides general-purpose servo functions. The IS300 is highly cost-effective and
reliable.
It is applicable to plastic molding, pipe extrusion, shoe making, rubber producing, and metal
casting.
This manual is a guideline for the selection, installation, parameter setting, on-site
commissioning and troubleshooting of the IS300 servo drive.
Before using the servo drive, read this manual carefully to have a thorough understanding of
the product. Keep the manual well and forward it to end users with the product.
Notes
•• The drawings in the manual are sometimes shown without covers or protective guards.
Remember to install the covers or protective guards as specified first, and then perform
operations in accordance with the instructions.
•• The drawings in the manual are shown for description only and may not match the product
you purchased.
•• The instructions are subject to change, without notice, due to product upgrade, specification
modification as well as efforts to increase the accuracy and convenience of the manual.
•• Contact the regional agent or customer service center of Inovance if you have problems
during the use.
■■ Product Checking
••
Whether the nameplate model and servo drive ratings are consistent with your order.
The box contains the servo drive, certificate of conformity, user manual and warranty
card.
••
Whether the servo drive is damaged during transportation. If you find any omission or
damage, contact Inovance or your supplier immediately.
-1-