Download INSTALLATION GUIDE
Transcript
BIG ASS FAN 2025 Installation Checklist Did a structural engineer approve the mounting structure? See page 5 for Big Ass Fans-approved mounting structures. Are you familiar with the function and use of the safety cable? See pages 12 and 14 for information on properly securing the safety cable. :LOOWKHIDQEHLQVWDOOHGVRWKDWWKHDLUIRLOVDUHDWOHDVWIWPDERYHWKHÀRRU" Will the fan be installed so that the airfoils have at least 2 ft (0.61 m) of clearance from obstructions? Will the fan be installed so that it is not subjected to high winds such as from a Heating, Ventilating, and Air Conditioning (HVAC) system or near a large garage door? If the fan is mounted at the same level or higher than a diffuser, the airfoil tips must be at a distance that is at least 1x the measure of the fan’s diameter. If the fan is mounted at the same height or below a diffuser, the airfoil tips must be at a distance that is at least 2x the measure of the fan’s diameter. Will the distance between multiple fans be at least 2.5x the fans’ diameter when measured from the centers of the fans? If you ordered multiple fans, did you keep the parts of each fan together? Customer Service: 1-877-BIG-FANS WWW.BIGASSFANS.COM ©2014 DELTA T CORP. ALL RIGHTS RESERVED