Download VxWorks
Transcript
VxWorks 5.5 BSP Developer’s Guide When defining the global mappings in sysPhysMemDesc[ ], make sure that the amount of virtual memory being mapped does not exceed 66 MB. Also keep in mind that additional virtual memory space may be mapped at run-time for private virtual memory in each of the eight contexts. SPARC Reference MMU The SPARC Reference MMU page size is 4KB. Because this does not agree with the default definition of VM_PAGE_SIZE in config/all/configAll.h, add the following #undef/#define sequence to config/bspname/config.h: #undef VM_PAGE_SIZE #define VM_PAGE_SIZE 4096 Due to a 32-bit physical address assumption in vmLib, it is impossible to fully represent the 36-bit physical addresses of the SPARC Reference MMU model. Thus, for the current version of vmLib, physical addresses must be physical page numbers (that is, physical address shifted to the right by PAGE_SHIFT, or 12 bits). This affects calls to vmGlobalMap( ), vmMap( ), and vmTranslate( ), as well as specifications in the sysPhysMemDesc[ ] array. For each of these calls (and specifications), do the PAGE_SHIFT of the physical address. For supporting multiple contexts, the SPARC Reference MMU implements a fourth layer in an otherwise three-layer page table indexed by the current context number. This table is variable in size and is defined by the constants exported from the BSP as follows: mmuInitNumContexts Initial number of contexts in table (which is rounded up to a power of 2 as well as what fits on a physical page). mmuMaxNumContexts Maximum number of contexts in table (not necessarily different than mmuInitNumContexts). mmuContextTableAlign Alignment required for context table. Each of these can be determined from documentation of the particular SPARC Reference MMU chips. BSP designers may want to limit mmuMaxNumContexts to prevent the table from getting overly large (on implementations that allow a large number of context table entries). 86