Download [1.7 APPLICATION FUNCT.] (FUn

Transcript
[1.7 APPLICATION FUNCT.] (FUn-)
This function uses the information supplied by a weight sensor to adapt the current [Brake release I FW] (Ibr) of the
[BRAKE LOGIC CONTROL] (bLC-) function. The signal from the weight sensor can be assigned to an analog input (usually a 4 - 20 mA
signal), to the pulse in input or to the encoder input, according to the type of weight sensor.
Examples:
- Measurement of the total weight of a hoisting winch and its load.
- Measurement of the total weight of an elevator winch, the cabin and the counterweight.
Elevators
External weight measurement:
The current [Brake release I FW] (Ibr) is adapted in accordance with the curve below.
Ibr
[Point 1 X]
(LP1)
Weight sensor signal
0
Zero load
[Point 2 X]
LP2
100%
[Point 1Y] (CP1)
This curve can represent a weight sensor on an elevator winch, where zero load on the motor occurs when the load in the cabin is not zero.
153
Hoisting
[Point 2Y] (CP2)