Download XTnano Operation Manual
Transcript
Issue 10.04.A XTnano – Version 10.04 – Operating Manual EVS Broadcast Equipment SA – January 2011 9.13 THE AUXILIARY AUDIO CLIP 9.13.1 INTRODUCTION This option allows adding a new stereo audio track (for example. sport comments, music, jingles, ambient sound) to the original video clips. This stereo audio track is available on the PVW output and on analogue outputs 7/8 or on digital outputs 15/16. The selection of the track output is done via the Setup menu – Page 5.1 F5. The original audio tracks are still available on outputs 1/2 (3/4). The auxiliary audio clip selected is always played back with normal speed (100%), whatever the selected playback speed for the video. When the playback of the playlist is not started from the beginning, the system calculates the offset between the current position and the beginning of the playlist, and applies the same offset to the Aux Clip, so that it can remain synchronized with the playlist. If the duration of the Aux Clip is longer than the playlist duration, the auxiliary audio clip keeps playing even after the video has stopped. Otherwise, the audio clip ends itself before the end of the playlist, when the audio clip reaches its OUT point. 9.13.2 HOW TO ADD/REMOVE AN AUXILIARY AUDIO CLIP TO A PLAYLIST 1. Make the Aux Clip button active by selecting a clip from the clip bank. This can be done outside of the PLST EDIT mode, or in PLST EDIT mode with PRV CTRL ON. You will see the Aux Clip option appearing in the secondary menu on the LCD of the Remote Panel. 2. Then press MENU to call the secondary menu, then Aux Clip button (SHIFT + B): the ID of the Aux Clip appears in the title bar of the Playlist screen ( F10) 3. To remove the current auxiliary clip, load the auxiliary clip, call the secondary menu by pressing MENU, then press CLEAR + SHIFT + (B) (Aux Clip) on the Remote. 80