Download Technical Specifications
Transcript
ITEM DESCRIPTION AND SPECIFICATION • Operating pressure 6 MPa (60 bar) • Max. permissible pressure 12 MPa (120 bar) • Temperature range -40 – + 125 °C • Min. bending radius 100 mm • DN 06 (Ø 6,3 mm) 20. 4 mm Safety laboratory cables, 106 pieces, red, blue and black Complete set, consisting of 106 safety laboratory cables with 4 mm safety plugs in the colours red, blue and black: • 10x red 50 mm • 10x blue 50 mm • 8x black 50 mm • 8x red 300 mm • 8x blue 300 mm • 18x black 300 mm • 8x red 500 mm • 8x blue 500 mm • 18x black 500 mm • 2x red 1000 mm • 3x blue 1000 mm • 2x black 1000 mm • 1x red 1500 mm • 1x blue 1500 mm, 1x black 1500 mm • Plugs with rigid protective sleeve and axial socket • Conductor cross section: 1 mm2 • 1000 V CAT II • Rated current: 16 A 21. Laboratory Workstation with Aluminium profile plate 700x1100mm and ER frame -The anodised aluminium profile plate forms the basis for all training packages. All of the components fit securely and safely into the grooves on the profile plate. There are grooves on each side and, if required, both sides can be fitted with components. The grooves are compatible with the ITEM profile system. Grid dimensions: 50 mm. Sizes 350 x 1100 mm and 350 x 250 mm supplied without side caps (H x W). 22. Hydraulic power pack with a constant-displacement pump, 230 V - Ideal for individual hydraulic workstations for all experiments using standard equipment sets TP 500, 600 and the MPS® punching station. • Mounting on Learnline with universal bracket • Mounting on Learntop-S: direct • Pump design: external gear motor with pressure relief valve adjustable from 0 – 6 MPa (0 – 60 bar) • Operating pressure 6 MPa (60 bar) • Motor: AC, single-phase with overload protection, start capacitor and ON/OFF switch • Tank: 5 l volume, sight glass, temperature display, drain screw • Air filter and return filter • Low-leakage, self-sealing coupling nipples for P and T • Plug socket for unpressurised return • Connecting flange for measuring container return • Dimensions: 580 x 300 x 180 mm (W x D x H) • Weight: 19 kg • Nominal voltage: 230 V AC • Rated output: 0.65 kW • Frequency: 50 to 60 Hz • Delivery rate (rated speed): 2.2 – 2.7 l/min at 1320 – 1680 m-1 • Protective cover for weight, 9 kg • Tabletop power supply unit • Power supply unit for mounting frame • Hydraulics Simulation software, license • Electrohydraulics: WBT 87 Closed-loop Pneumatic Trainer/ Advanced Electro-Pneumatics, Equipment Set Accessories/Components: 1. Signal input, electrical 2. 3/2-way valve with pushbutton actuator, normally closed Pilot actuated, single solenoid piston spool valve with pneumatic spring return, non-detenting and detenting manual override, and LED. • Electrical connection via integrated 4 mm safety sockets • 24 V DC power supply • Switching time on/off 6/16 ms • Pneumatic connection via QS-4 push-in fitting • Operating pressure 150 – 800 kPa (1.5 – 8 bar) • Quick-Fix® safety and quick action mounting system for slotted profile plates 3. 2 x 3/2-way solenoid valve with LED, normally closed Pilot actuated, single solenoid piston spool valve with pneumatic spring return, non-detenting and detenting manual override, and LED. • Electrical connection via integrated 4 mm safety sockets Page 53 of 60