Download Installing i-cut
Transcript
Installing i-cut Before installation of i-cut software can begin, you must first complete the following: • Install the Epix® PIXCI® Video Capture Board into an unused PCI slot in your computer. • Make sure all Motherboard drivers for your PC are installed. • Connect your i-cut dongle to an available USB port. • Connect the plotter and vision system to your computer. • Log onto your Windows® operating system administrator account. • Insert the i-cut installation disc in your CD-ROM compatible drive. Installing i-cut requires adding the following software components to your system: • Epix PIXCI Video Capture Board Driver • HASP® copy protection support • i-cut main program • Adobe® Acrobat® reader • XL/XE-Guide machine control software (Kongsberg users only) • KAVO spindle control software (Kongsberg users only) To install the Epix PIXCI Video Capture Board Driver: As mentioned above, please make sure the Epix Video Capture Board is installed into an available PCI slot in your computer and the installation disc is inserted into your CD-ROM drive. 1. Windows will detect your new hardware the first time you log on after installing it. Follow the instructions in the Add Hardware Wizard to continue installing the driver. If your new hardware is not automatically detected, double-click the Add Hardware icon in the Control Panel. 2. After the wizard has finished searching for new hardware, it will ask: 3. “Can Windows connect to Windows Update to search for software?” Activate No, not at this time and click Next to continue. 4. In the next window, activate Install from a list or specific location (Advanced) i-cut 6.2 USER’S MANUAL 7