Download Instruction Manual
Transcript
Manual (log on demand) readings are logged each time LOG is pressed. All of the records are stored in a single Manual lot for the measurement type. New records made on different days are stored in the same Manual lot. Logging Function Stability is a log on demand that is made each time LOG is pressed and the stability criterion is reached. Stability may be set with Fast, Medium or Accurate settings. Use the u arrow to select between Interval, Manual, Stability. When Interval is displayed use the p and q arrows to select the setting for the timed interval. When Stability is displayed, use the p and q to select the measurement stability setting A complete set of GLP information including date, time, range selection, temperature reading, calibration information and probe serial number is stored with each log made. Select Interval and sampling period in the SETUP menu (Not available in Basic mode). To start Interval logging, press the LOG key while the instrument is in measurement. Interval Logging A “PLEASE WAIT” message will be displayed followed the number of free spaces. During active interval logging, lot information is displayed on the 3rd LCD line. The line indicates in which lot the data will be placed and keeps track of the number of logged records taken. The “LOG“ tag is continuously on during active logging. Pressing u during an interval log will display the number of logs available. Setup/Installation 19