Download ChipScope Pro documentation
Transcript
Xilinx is disclosing this user guide, manual, release note, and/or specification (the "Documentation") to you solely for use in the development of designs to operate with Xilinx hardware devices. You may not reproduce, distribute, republish, download, display, post, or transmit the Documentation in any form or by any means including, but not limited to, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent of Xilinx. Xilinx expressly disclaims any liability arising out of your use of the Documentation. Xilinx reserves the right, at its sole discretion, to change the Documentation without notice at any time. Xilinx assumes no obligation to correct any errors contained in the Documentation, or to advise you of any corrections or updates. Xilinx expressly disclaims any liability in connection with technical support or assistance that may be provided to you in connection with the Information. THE DOCUMENTATION IS DISCLOSED TO YOU “AS-IS” WITH NO WARRANTY OF ANY KIND. XILINX MAKES NO OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED, OR STATUTORY, REGARDING THE DOCUMENTATION, INCLUDING ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT OF THIRD-PARTY RIGHTS. IN NO EVENT WILL XILINX BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, EXEMPLARY, SPECIAL, OR INCIDENTAL DAMAGES, INCLUDING ANY LOSS OF DATA OR LOST PROFITS, ARISING FROM YOUR USE OF THE DOCUMENTATION. © 2002-2009 Xilinx, Inc. XILINX, the Xilinx logo, Virtex, Spartan, ISE, and other designated brands included herein are trademarks of Xilinx in the United States and other countries. The PowerPC name and logo are registered trademarks of IBM Corp. and used under license. All other trademarks are the property of their respective owners. Revision History The following table shows the revision history for this document. Date Version Revision 04/09/02 1.0 Initial Xilinx release. 10/29/02 5.1 Added new Chapter 3, “Using the ChipScope Pro Core Inserter”; Old Chapter 3 is new Chapter 4, “Using the ChipScope Pro Analyzer”; Updated all chapters to be compatible with 5.1i tools; Revised version number to be in sync with version of tools. 03/06/03 5.2 Updated all chapters to be compatible with 5.2i tools; Updated version number to reflect version number of tools. Chapter 1: Added the “Choice of Match Unit Counter” section to Table 1-3; Chapter 2: Added the “Selecting Match Unit Counter Width” section; updated several “trigger” screen shots; Chapter 3: Added “Selecting Match Unit Counter Width” section; Chapter 4: Updated screen shots in the “Configuring the Target Device(s)” section; Added “Displaying Configuration Status Information” section; Updated “Counter” section; Added notes to the “Depth” and “Samples Per Trigger” sections; Updated “VIO Console Window” section and most of its screen shots. 05/15/03 5.2.2 8/29/03 6.1 Updated all chapters to be compatible with 6.1i tools; Updated version number to reflect version number of tools; Added Chapter 5, “ChipScope Engine Tcl Interface” 6.2 Updated all chapters to be compatible with 6.2i tools; Updated version number to reflect version number of tools; Chapter 2: Added the “Generating the ATC2 Core” section; Updated all chapters to reflect ATC2 compatibility; Miscellaneous edits for clarity or continuity. 02/13/04 ChipScope Pro 11.4 Software and Cores www.xilinx.com UG029 (v11.4) December 2, 2009