Download FT-7900 Programmer Help

Transcript
166
FT-7900 Programmer Help
(plus) or subtract (minus) the Offset Frequency from the Receive Frequency when
calculating the Transmit Frequency for the memory channel.
Enter Plus, Minus, + or - for the process to recognize the command.
NOTE: Be sure to use Offset Direction if your file contains + and
&endash; in this column. Using Offset Frequency for this column will
result in all channels being imported as simplex.
Operating Mode: Enter FM, AM, or WFM as appropriate for the frequency.
Name: Enter an Alpha/Numeric tag (up to 8 characters) for the memory channel to
provide an easy reminder of the function of a particular frequency. Not all radios have
this available for each memory channel. Consult your Users’ Manual for details.
Tone Mode: Use of the tone systems of the radio allows for silent monitoring until a
call is received with a corresponding tone. Tone mode also allows access to
repeaters that are made private with a PL tone. Most radios offer CTCSS (Continuous
Tone Coded Squelch System) or DCS (Digital Coded Squelch) to be tailored to your
particular needs. Consult your Users’ Manual for details specific to your model.
Use of either of the tone systems requires two steps. Your import file will handle
these steps in THREE (3) columns.
Step 1: Turning on Tone Mode
There are now so many different tone modes and combinations of them, we
recommend that you use the designation just as it appears in the
Programmer for your radio to identify the Tone Mode to be used. Examples
would include but not be limited to:
None - Tone mode off
Tone - Encode
T Sql - Encode/Decode
DCS - DCS Tone
Others specific to your radio as detailed in the Tone Mode column of the
programmer.
Step 2: Setting the tone frequency (CTCSS) or selecting the code for the tone
(DCS).
Note: The CTCSS tone frequencies and the DCS tone codes should
be stored in TWO separate columns in your file to be imported. The
© 2012 RT Systems, Inc.