Download Reference Guide
Transcript
CAD mode Release 16.0 Set Piece tab Options on the Set Piece tab affect the facet properties for the selected surfaces or set pieces and, consequently, how they will respond during simulation in shaded views when the beam quality is set to “Light up.” Facet Splitting splits surfaces or set pieces into small triangles for the purposes of smooth beam fallout. Use Document Defaults: Select this check box if you want to reference the object settings that are saved in Show Options. For more information on object settings, refer to the “Object Settings tab” on page 90. Deselect this option to set objectspecific facet options. Facet Splitting: Select this check box to ignore the document defaults and set objectspecific facet properties. Specify the size of the triangles in the Facet Resolution box. The more triangles you have, the more realistic the cosine distribution is. However, this also decreases the simulation speed. Object-specific properties As explained above, objects also have properties that are particular to the type of object. For example, fixtures have unit numbers but do not have a radius. When an object is selected and its properties are displayed, a tab appears in the properties dialog box for that type of object. When you select multiple objects of different types, tabs appear for each type of object selected. The following objects are defined: points lines text labels dimensions library items For all other types of objects (venues, circles, arcs, risers, cylinders, spheres, and cameras), refer to “Drawing objects” on page 123. In these cases, the properties dialog offers the same options that were given when the object was initially drawn. Hanging structures properties (pipes, truss, floor mounts, and so on) are fully defined in “Hang structures” on page 171. Fixtures and lighting-specific object properties are fully defined in “Hanging and focusing fixtures” on page 179. 150